What Vehicles Use 6F35 Transmission?


The 6F50 transmission was first introduced in 2007 in the Ford Edge, Ford Explorer, Lincoln MKX , Lincoln MKS , Ford Taurus, Ford Flex, Lincoln MKT, and Lincoln MKZ. The 6F35 transmission was introduced in 2009 and appeared in the Ford Escape, Ford Fusion , Ford Focus , Ford C-Max , and Ford Kuga.

Is a 6F35 a CVT transmission?

The 1.6L EcoBoost model was available with the Ford B6 6-speed manual, the other engines were paired with the 6F35 6-speed auto, the hybrids got the Ford HF35 CVT transmission, while the V6-powered Ford Fusion Sport got the 6F55.

Replacement 6F35 Transmission:

Transmission Street Smart Transmission
6F50 / 6F35 2480

Who makes the 6F35 transmission?

Each company will name and manufacture the transmission separately: Ford builds the 6F50 and 6F55 along with the 6F35 (related to the GM 6T40 transmission) at their Van Dyke Transmission Plant in Sterling Heights, Michigan, and in the future at Sharonville Transmission in Sharonville, Ohio.

What vehicle has a 6F50 transmission?

The new 6F35 6-speed automatic transmission is assembled at Ford’s Van Dyke Transmission Plant, which also produces the 6F50 6-speed automatic in 2008 models of the Ford Taurus, Taurus X, Edge, Mercury Sable, Lincoln MKX and 2009 Ford Flex and Lincoln MKS.

Do Ford Edge have transmission problems?

2. Transmission Problem. Another serious problem with the Ford Edge is related to its transmission. Information from carcompliants.com shows this problem occurs at an average mileage of 80,850 miles and costs $2,870 on average to repair.

Is the Ford 6-speed transmission good?

Just the base V6 work trucks still use a 6-speed. We have been impressed with the smoothness and precision of the newer 10-speed automatics in the Ford trucks. You may think that it will hunt for gears when climbing hills or towing heavy, but it pretty much always knows which gear is best.

How much power can a 6F35 transmission handle?

From what I’ve read the 6F35 was made only to handle medium loads of power which means mid 200 horsepower and 300 torque or so. Those of you who have flashed your cars – how does your transmissions feel or seem to be holding up?

What year Ford Fusion have transmission problems?

No matter which Fusion generation you opt for, transmission problems are likely to occur, especially on cars built between 2007 and 2017, with 2010, 2012, and 2013 year models being particularly bad.

Does a Ford Fusion have a CVT transmission?

All Fusion Hybrid and Fusion Energi models are powered by an Atkinson cycle naturally-aspirated 2.0L I4 gasoline engine with an electric motor, as well as a Continuously Variable Transmission (CVT). Gasoline-only Fusion models use a six-speed automatic transmission.

Can the Ford PowerShift transmission Be Fixed?

Since the entire PowerShift transmission will need to be replaced in the event of failure, it will be an expensive repair – anywhere from $2,000 to $4,000 if you take it to a mechanic. There is no way to completely fix a PowerShift transmission since it’s an inherent flaw of the transmission design.

What is the difference between a 6T70 and a 6T75?

The primary difference is the 6T75 has greater torque handling capability (see specs). The input gearset of the 6T75 uses five pinion gears, versus four pinions for the 6T70. In addition, the case of the 6T75 is slightly larger and includes a heavier ribbed case for strength.

Where are Ford transmissions made?

The 10R80 was first produced at the Ford Livonia Transmission Plant in Livonia, Michigan, and the Hydra-Matic 10L80 is made at the General Motors Romulus Powertrain Plant, in Romulus, Michigan. Ford’s Sharonville Transmission plant started 10R80 production in 2018 and is scheduled to start 10R140 production in 2019.

Is a 6 speed automatic a v6?

None. Transmissions, even automatics, do not have cylinders. Automobile motors have cylinders. A six-speed automatic can be, at least theoretically, connected to a four, five, six, eight-, ten-, twelve-, or sixteen-cylinder motor.

What is the difference between a 6 speed and 10 speed transmission?

Compared to a 6-speed transmission, the 10-speed adds only one-inch and four pounds to the transmission body. Without a single cast-iron component, the transmission is light while remaining powerful and efficient.

What transmission is in a 2008 Ford Edge?

The Edge is available in front- and all-wheel-drive forms, both powered by a 265-hp, 3.5-liter V-6 engine mated to a six-speed automatic transmission.

What are the most common problems with the Ford Edge?

What are the Most Common Problems with the Ford Edge?

  • Faulty door sensors in first-generation vehicles.
  • Corroding bolts on the power steering motor.
  • Early engine failures that often happen after the original powertrain warranty expires.
  • Bad assembly of start/stop accumulator in recent model years.
  • Why are they discontinuing the Ford Edge?

    The new electrification plans led to the cancellation of the Ford Edge for the 2023 model year. Since the Ford Edge arrived on the scene, it’s pretty much stolen the show. Now, the SUV is currently in its second generation and still sells very well.

    How much does it cost to replace a transmission in a Ford Edge?

    The cost of a new Ford Edge transmission could be over $3,500 depending on the vehicle, however, transmission services such as fluid changes and a transmission fluid flush are considerably less fancy, in some cases costing less than $150.

    Which Ford transmission is better 6 speed or 10-speed?

    Compared with the 6-speed, the 10-speed delivers improved overall performance, with enhanced acceleration at the low and mid ranges of the power band. Features include optimized wide-span gear spacing coupled with drag-reduction actions plus three overdrive gears.

    What year f150 has transmission problems?

    The company had to recall over 1 million trucks made between 2011 and 2013 because of transmission problems.

    Does Ford have a 10-speed transmission?

    Ford first introduced the 10-speed gearbox in the 2017 Ford F-150. The Ford F-150 10R80 automatic transmission developed jointly between Ford Motor Company and its historic rival, General Motors can be found in the Ford Expedition, Ford Mustang, Ford Ranger, Lincoln Navigator and abroad, the Ford Everest.

    Is there a recall on Ford Fusion transmission?

    Ford Motor Company (Ford) is recalling certain 2013-2016 Fusion vehicles equipped with 2.5 liter engines. The bushing that attaches the transmission shifter cable to the transmission may degrade over time and cause the bushing to detach from the transmission.

    How much does it cost to replace a Ford Fusion transmission?

    The cost of a new Ford Fusion transmission could be over $3,500 depending on the vehicle, however, transmission services such as fluid changes and a transmission fluid flush are considerably less expensive, in some cases costing less than $150.

    What is the life expectancy of a Ford Fusion?

    A well-maintained Ford Fusion can last for over 200,000 miles. If you drive an average of 12,000 miles per year, that’s around 17 years on the road. J.D. Power and Consumer Reports claim Ford Fusions can even go longer. The average miles you can put on Ford Fusion cars is around 250,000.

    Is CVT better than automatic transmission?

    Depending on the vehicle and the driver, a CVT can provide a smoother driving experience when comparing it to a traditional automatic. According to Carfax, one of the most significant advantages to having a CVT is that they are often more fuel-efficient than a regular automatic.

    How long will a CVT transmission last?

    CVT transmissions last just as long as a traditional automatic transmission and are designed to last the full life of the vehicle. The typical CVT has a life expectancy of at least 100,000 miles. Certain models like the Toyota Prius commonly last well over 300,000 miles.

    Why is Ford discontinuing the Fusion?

    Ford Authority reported that the Ford Fusion’s production officially ended at the end of July 2020. Ford made the decision to focus its budget towards its more popular SUVs, like the Explorer and rugged new Bronco. As a result, we also said goodbye to both the Fiesta and the Focus sedans.

    When did Ford fix the PowerShift?

    Ford first modified the PowerShift transmission in 2012 after the automaker’s scores in J.D. Power and Consumer Reports surveys dropped. But these issues didn’t go away until Ford began getting sued in 2017.

    What Ford models have transmission problems?

    Ford’s Fiesta, Focus, and Fusion lines have been plagued with transmission problems, starting from shortly after owners buy or lease the cars, and sometimes resolving only when owners buy something else.

    Why do Ford transmissions fail?

    Ford stated that these transmissions, “may exhibit intermittent concerns of loss of transmission engagement while driving, intermittent no start, or a loss of power.” This issue is due to the transmission shifting into neutral when driving or setting off, which is caused by improper transmission control module

    Do Ford and Chevy have the same transmission?

    Yes, it’s the same transmission (almost)

    This might come as a surprise to those who think of Ford and GM as archrivals, but the two companies developed their new 10-speed automatic transmissions together.

    Does Ford use Chinese parts?

    Although it remains an American car brand, many parts are not exclusively manufactured in the country. The automaker also produces and markets vehicles overseas. Some plants manufacture Ford parts in countries like Mexico, Canada, and China.

    Does Ford use GM transmissions?

    This new agreement marks the third time in the past decade that GM and Ford have collaborated on transmissions. These collaborative efforts have enabled both companies together to deliver more than 8 million durable, high-quality 6-speed front-wheel drive transmissions to customers around the globe.

    Is a 6 speed automatic transmission good?

    A six-gear transmission is a good number of gears for a car. First to third gears are good for speeding away from stoplights and corners, while fourth to sixth gears are typically used to cruise at varying speeds.

    Is there an 8 speed manual transmission?

    The Eaton Fuller 8LL manual transmissions provide drivers with the versatility they need for a mix of on- and off-highway applications. These transmissions offer eight road speed gears and two additional deep reduction ratios in low and reverse.

    What is the advantage of a 6-speed transmission?

    A brief overview of the benefits of a 6 speed manual transmission, include advantages like a massive increase in acceleration, more power when you need it regardless of road speed, quieter and more relaxed highway cruising, reduced engine wear and vastly improved fuel economy.

    Is a 10 speed automatic good?

    The logic behind the 10-speed transmission is quite unique, and it created a transmission that offers several benefits over six-speed and eight-speed transmission from General Motors. This new transmission offers great efficiency, and performance, while also optimizing fuel economy.

    Is more gears in a transmission better?

    As a general rule, the more torque an engine has, the less gears the transmission needs to provide performance. Some of the most powerful drag cars have only two or three gears in their transmissions, but on the street, having additional gears will give you smoother performance and better fuel economy.


    Leave a Reply

    Your email address will not be published.