What Is A Posi-Lock?


Posi-Lock – The Connector of Choice for OEM & Military Use. Our electrical connectors require no crimping. Connectors simpily hand tighten. An electrical connector that meets the needs of todays OEM’s, and is so good, it’s reusable. Truly a connector for the 21st century.

Is Posi-Lock good?

These posi-locs are great. They allow you to hook the wires up and take them apart without having to cut the wires like a crimp connector. Securely joins the wires. These are ideal for joining 2 wires but not as good for multiple wires.

Who bought Posi-Lock?

SPX FLOW Inc. has purchased the puller business assets of Posi Lock Puller, Inc. Posi Lock brand has been providing professionals with top-of-the-line products and services for over 40 years.

How does a Posi-Lock connector work?

​Posi-Locks are perfect for most automotive projects like splicing wires for auxiliary lights, horn relays, LED brake lights and much more. It’s such a simple concept — you unscrew the two threaded ends from the central connector and insert the wires, screw them back on and you’re done!

Are Posi taps waterproof?

The Posi-Lock and the new Posi-Tap connectors make life so much easier. They’re waterproof, vibration proof and can be reused.

Where are Posi Lock pullers made?

Posi Lock pullers are USA made and Posi Lock actually makes pullers for many other name brand manufacturers. The Posi-Lock line of quality manual gear and bearing pullers sets new standards for quickness, ease and convenience.

What is posi track differential?

In a positraction differential, the unit senses which wheel has the greatest traction, when one tire is slipping or stuck, and sends power to that wheel. Power to the other wheel continues until equal control is returned to both tires. Positraction is beneficial when road conditions are wet or muddy.

How do you tap into a wire? (video)

https://www.youtube.com/watch?v=93JYQc1bG20

How do you splice wires together? (video)

https://www.youtube.com/watch?v=NZtwD_F7lTA

Are Posi taps safe?

Posi-Taps provide ultimate wire penetration for a solid connection and a secure twist for reliable securement. They seem a bit expensive for the quantity given but they are worth EVERY DOLLAR.

What is the difference between a locker and posi?

With a locker both wheels will spin at the same speed. With a posi it allows the wheels to turn at differenthe speeds. When turning the inside wheel needs to turn slower than the outside .

How do I know if my rear is posi? (video)

https://www.youtube.com/watch?v=T0DeTzQWNBQ

Why is it called a posi track?

Positrack is short for positraction, or limited-slip differential, which makes driving safer as the torque is distributed equally so that the machine is less likely to slip. Basically, differentials transfer the power from the engine to the wheels via the axle, allowing the vehicle to move.

What is a scotch lock? (video)

https://www.youtube.com/watch?v=9U0N_BFHyaY

What’s a butt splice?

Despite its ambiguous name, the butt splice connector is actually a fairly common and useful connector used in electrical work. A butt splice connector is a form of so called “crimp” connectors. Crimp connectors are used to terminate wires safely, or connect one wire to another. The wire is inserted into the connector.

How do you tap into a wire without cutting it? (video)

https://www.youtube.com/watch?v=175UNDdYI5I

What are jelly crimps?

Jelly Crimps. The small size of the UY connector reduces the splicing bundle O.D. to a minimum. The connector’s two ports accept two solid copper conductors. The connector is filled with a sealant to provide moisture resistance.

Can I use electrical tape to connect wires?

Electrical tape is an economical general purpose insulating tape that has excellent resistance to moisture, abrasion and corrosion. It is used to insulate electrical wires, insulate other material that conduct electricity and make minor repairs to damaged wires.

Can you use superglue to connect wires?

super glue (cyanoacrylate glue) is a good insulator. i have heard of people using it to provide extra hold on wire wrap boards. its not doing the job of solder though, its not providing the electrical connection but rather just keeping it from coming unwrapped. Plastic tape is an insulator.

How do you use a posi tap? (video)

https://www.youtube.com/watch?v=N64p6ndlTQ8

What is a military splice?

To perform a military splice you would splice into the current electrical system, separate the insulation and use a pointed tool, like a pick tool, to divide the wires and run your new wire in between.

Are heat shrink connectors good?

The heat shrink is very nice and shrinks down tight on the conductor. There is some type of melting material in these that flows when heated and fills all the interstitials inside the connection. This makes for a very good complete termination or splice.

Is Posi or limited slip better?

The Positraction limited-slip differential design offers better vehicle handling and acceleration, and drivers get more forward power because the driven wheel slips less.

How do you know if you have Positraction?

Shift your transmission into neutral so that the rear wheels rotate freely. Grasp one rear wheel, turn it and observe the other rear wheel. If the other rear wheel turns in the same direction, there is positraction.

How do I know if my 10 bolt is posi?

Locate two lugs, or ears, extending out from the bottom of the gear casing approximately in the 4 o’clock and 8 o’clock position. This will firmly identify the unit as having come with Positraction from the factory.

Does Ford have Positraction?

Nope. Only GM products have posi traction. Ford products have limited slip.

How do I know if my rear end has a locker? (video)

https://www.youtube.com/watch?v=rHtohwImDLQ

How do I know if my 12 bolt is posi?

If you see springs in the window of the carrier, either coil springs like this or an S-shaped spring, it’s a Posi unit.

When did Positraction come out?

First used in 1957 for muscle cars, it quickly gained popularity in the late 1960s and 1970s. Limited slip differentials had been available from Volkswagen since the early 1950s, but Chevrolet and Studebaker were the first American manufacturers to offer them and popularize them.

Is a posi track a skid-steer?

There are two main variations of small loaders – skid-steer and posi-track. Many refer to them all as Bobcats, but that is simply a common brand name. While there are many variances with these machines, the main point of difference is that skid-steer loaders have wheels, and posi-track loaders have tracks.

What is the difference between a posi track and a skid-steer?

There are two variations of loaders available: the skid-steer and the posi-track. The main difference is that one has wheels while the other has tracks. Ultimately, they can both carry out similar tasks (digging, lifting panels, landscaping, etc.) and they both include radial and vertical lifting configurations.

Are scotch locks reliable?

I consider scotch locks are ok if used correctly and in the right atmosphere. However most failures are due to water ingress and corrosion or attempting to use the connectors on the wrong gauge wire. Most IDC’s used in electronic are much closer quality controlled with conductor size being specific to a particular IDC.

Are scotch locks waterproof?

3M™ Scotchlok™ Moisture Guard Connector MGC is ideal for applications requiring moisture and UV protection. The connector housing is weather resistant for above ground applications. The connector has a weather resistant polycarbonate body and withstands temperatures up to 221 degrees F (105 degrees C).


Leave a Reply

Your email address will not be published.