How Much HP Can A C6 Transmission Handle?


Yes a c6 will hold 500 hp but not a stock one with 3 high gear clutches or a stock valvebody….A good upgrade is to remove the wave washer from the forward clutch and fit 5 plates,upgrade the high gear clutch to at least 4 but 5 is better and go with a transgo valvebody kit…

Is the C6 a good transmission?

The C6 was produced with four basic bell-housing bolt patterns over its long production life and is a very rugged transmission designed for high-power applications.

What Ford came with a C6 transmission?

Also, the C6 transmission was used in high-performance vehicles as well as trucks with more significant engines such as Ford trucks, passenger cars, and Lincoln cars. The C6 was evident in the Ford F-Series between 1967 to 1996 as well as the Ford Bronco between 1978 to 1991.

What engines fit a C6 transmission?

The C6 was used in trucks and cars with larger engines. Five different bell housing varieties exist for use with various Ford engine families: The Windsor pattern was used on the 300 I6, the Ford Windsor engines and the 351 Cleveland. The 460 pattern was used on the 351M and 400 and all of the Ford “385” engines.

Can you upgrade a C6 transmission?

You can upgrade your Ford C6 transmission to ensure it can meet the modern-day expectation of performance and toughness. This may be a classic ride, but the mere fact that it was built to offer long term durability means it can be revamped to handle whatever you throw at it.

Will a C6 transmission bolt a 302?

Will A Ford 302 Bolt Up To A C6 Transmission? It is possible to fit a c6 with a smallblock bellhousing pattern FE pattern, but it is not the same. It should be able to handle a 302 with a mild cam, a 4 bbl intake, and a good set of headers.

How many speeds is a C6 transmission?

The C6 transmission is a three-speed that appeared in most Ford trucks between 1960 and 1997.

Does a Ford C6 transmission have overdrive?

C6 was never overdrive. I believe you would need to go to a E4OD or 4R100 and then deal with electronic shift control.

How do I identify a Ford transmission?

  • Inspect the pan found on the bottom of the transmission.
  • Count the number of bolts on the transmission pan.
  • How many quarts does a C6 transmission hold?

    It requires 7-quarts of Type FA transmission fluid with the stock pan, plus an additional 2–4 quarts for the torque converter.

    How many bolts does a C6 transmission have?

    The round bell, six-bolt C6 transmission for FE-series big-block V-8s. A C6 is easily identified by its one-piece bellhousing and main case design. The C6 was produced with four basic bellhousing bolt patterns over its long production life and is a very rugged transmission designed for high-power applications.

    Will a 390 bolt up to a C6 transmission?

    Nope, it won’t fit. The 390’s are from the FE engine family, thus the bellhousings are different than the 385 series engines (includes 429,460). None of the C-6’s have removable bellhousings.

    What is a Ford FMX transmission?

    The Ford FMX transmission is a 3-speed automatic transmission that combines the best engineering and design features of the MX and the FX. The FMX transmission design uses the smaller size FX style case with MX-style internal rotating components.

    What is a Ford C5 transmission?

    C5 were medium-duty, three-speed transmissions. The main C5 modification was a lock-up clutch to improve gas mileage on the highway.

    How do I know if I have a C4 transmission?

    The easiest way is to check the transmission identification tag, which is located under one of the servo bolts on the passenger-side servo. On some transmissions the tag may be located under one of the driver-side servo bolts. There should be a series of numbers and letters which tell what year it is.

    Will a C6 transmission fit a 289 engine?

    This C6 Transmission is equipped with TCI StreetFighter components to handle up to 675 HP from Ford 289/302/351C/351W engines.

    Will a C6 bolt up to a 289?

    The C6 will physically bolt onto either the 289 or 302 but I don’t think it will fit the 66 tunnel without some modification to the tunnel. It should fit the 68 tunnel fine, since a big block with a C6 was available that year.

    What transmission goes with a 302?

    What Transmission Goes With A Ford 302? Among many Ford products, the Ford C-4 automatic can be relied upon for reliable three-speed control, particularly for 289, 302, and 351 engines.

    What’s the difference between a C4 and a C6 transmission?

    The C4 transmission was primarily used in cars. The C6 transmission could handle more power. Due to the ability to handle more power, the C6 transmission was used in many Ford trucks with bigger engines, and in larger cars that were manufactured with bigger engines.

    Is a C4 transmission good?

    The most reliable automatic transmission Ford has ever produced has been the C4 Cruise-O-Matic. The C4 is a simple three-speed automatic transmission you can rebuild in your home garage with common hand tools.

    Can you add overdrive to a 3 speed transmission?

    If you like your three-speed enough to keep it, there’s a way to get the extra gear you need for the highway. Gear Vendors makes a bolt-on overdrive unit that can be adapted to most American automatics, 2WD, or 4WD.

    Can I tell what transmission I have by the Vin?

    Unfortunately, this is not required by the NHTSA VIN standard. Some OEMs still use the same 10-digit VIN patterns for automatic and manual transmission vehicles, meaning that VIN alone will not be enough to determine the vehicle’s transmission type.

    What type of transmission do I have?

    The simplest way to find your transmission type is to look in your owner’s manual. Your manual should have the name and type of transmission, along with service information. If you’ve misplaced your owner’s manual, most trucks have a white label printed on the inside of the driver’s door.

    What Ford transmission has 17 pan bolts?

    The AXOD transaxle has 17 bolts to retain its fluid pan.

    How does a E4OD transmission work?

    History of the Ford E4OD and 4R100

    The extra overdrive gear allows the vehicle to achieve a higher cruising speed with a lower engine speed. This is because the transmission ratio makes the output shaft spin faster than the input shaft from the engine. It improves overall performance and leads to better fuel economy.

    What transmission is in C6 Corvette?

    Chevrolet Corvette (C6)
    Transmission 6-speed T-56 manual 6-speed TR-6060 manual 4-speed 4L65-E automatic (only for 2005, and 2006-07 Z06 on special request) 6-speed 6L80 automatic
    Dimensions
    Wheelbase 105.6 in (2,682 mm)
    Length 174.6 in (4,435 mm) 175.6 in (4,460 mm) (Z06, ZR1)

    How do I know if my C6 has a small block transmission?

    Look for a seam between the bell housing and the body of the transmission. If no seam exists, the transmission is a C6. If a seam does exist, it will be necessary to inspect the oil pan to determine whether the transmission is a C3 or a C4.

    Is a Cruise O Matic a C4?

    The Ford-O-Matic was manufactured from 1951 until it was replaced by the C4 in 1964.

    How do you tell a 390 from a 460?

    Look and see if the intake manifold extends under the valve covers if so it would be in the FE family=390. The 390 will have the Exhaust manifold bolts top and bottom of the port, 460 should be staggered on the sides. If you post Pictures We could mot likely tell you what it is!

    What transmission bolts up to a Ford 390?

    If you are talking manual trans, then a 4 speed truck trans will bolt to the 390 with the correct truck bell. Again, lots of those out there, 352, 360, 390, any one will do as long as it is ’66 or newer.

    How can you tell the difference between fm4 and FMX?

    The C4 has a low-reverse band as does the FMX. The C6 has low-reverse clutches instead of a band and drum.

    When did Ford use the FMX transmission?

    By the way Ford started using the Fmx in 1967. Before that, cast iron Borg Warner, small case, medium case, and large case.

    How do I identify a Ford FMX transmission?

    FMX’s should have 14 pan bolts. Tough old transmission. If it’s cast iron, and is a 3-speed auto, that is an FMX.

    Will a C4 transmission fit a 302?

    Registered. The 6cyl C4 will not work with the 302 , unless the tranny is ripped open and has some V8 pieces installed . The input shaft is smaller than the V8 version and the (Ithink) forward clutch drum that engages the input shaft is splined to the smaller size of the 6 cyl input shaft .

    What is the difference between a C4 and a C5?

    C4 and C5 instances run on different hardware systems. C4 runs on Haswell chips, while C5 runs on Skylake with the Nitro system. In some situations, such as governmental clouds, all resources have to be vetted and approved. So it’s possible that the C4 might be approved while the C5 isn’t.


    Leave a Reply

    Your email address will not be published.