How Much Does Raptor Liner Cost?


How much does Raptor liner cost? $139.99 & FREE Shipping. How much is Rhino line? Wondering what a Rhino liner install costs? We conducted a national survey of Line-X and Rhino Liner installers and we learned that the national average install price is $470.41.

Is Raptor liner a good bedliner?

Absolutely! It’s extremely durable, easy to apply, and affordable. If you’re using it for its intended purpose (most typically, bedliner coating), this is hands down one of the best bed liners on the market.

How many sq ft does Raptor liner cover?

The 1 US Gallon Raptor Liner Kit is the industry standard in bed liner coating. Each kit contains four of Raptor and one tin of hardener. Each kit covers approximately 125 square feet, enough to do a full size pick-up truck bed.

Do you have to sand before Raptor liner?

Clean the surface with wax and grease remover and lightly sand with 180 grit sandpaper before applying RAPTOR.

Which spray in bedliner is best?

6 Best Spray-In and Roll-On Bedliner Kits (DIY to Save Money)

  • #1 – U-Pol Raptor Spray-On Truck Bed Liner. Pros.
  • #2 – Custom Coat Spray-On Truck Bed Liner. Pros.
  • #3 – Al’s Liner Spray-In Truck Bed Liner Kit.
  • #4 – Herculiner HCL1B8 Brush-On Bed Liner Kit.
  • #5 – Linerxtreeme Spray-On Bedliner Kit.
  • #6 – Rust-Oleum Truck Bed Coating.
  • How much Raptor liner do I need for whole truck?

    The 1 US Gallon Raptor Kit is the industry standard in bedliner coating. Each kit contains four bottles of Raptor and one tin of hardener. Each kit covers approximately 125 square feet, enough to do a full size pick-up truck bed.

    Can you roll on Raptor liner? (video)

    https://www.youtube.com/watch?v=P0aVJGGNyQc

    How long does it take for Raptor liners to dry?

    RAPTOR can be baked for 30 minutes @ 140°F. Baking will speed up the initial cure, but it is still recommended that you wait 2-3 days for light usage and 7 days for heavy duty usage. Flash-off / min @ 68°F Wait 60 minutes between coats.

    How do I prepare my car for a raptor liner? (video)

    https://www.youtube.com/watch?v=TYQrymeLutA

    How much is the Raptor liner for the bottom of a truck?

    How Much Does One Gallon of RAPTOR Bed Liner Cover? As a general rule of thumb, one gallon should be sufficient for a 6-foot pickup truck bed. One gallon of RAPTOR will cover approximately 85 square feet of two coats, each about 7-18 MIL thick per coat when spraying.

    How much does a raptor liner cost to paint a tray?

    Average Coverage: 1 Litre covers approximately 3 square metres (two coats) One 4 Litre kit will cover a 1.9 metre ute bed.

    How much does it cost to Bedline a whole truck?

    The cost of a LINE-X spray-on bedliner varies by location but averages between $600-$700. Customers can choose to upgrade their bedliner with UV protection to prevent fading or opt for a tougher spray-on coating formula for maximum durability.

    Can you put Raptor liner over rust?

    You can use Raptor liner over powder coating and other finishes with proper prep. But Raptor will not tolerate rust at all. Also you have to let what ever you treat the rust with to fully cure. In the case of POR-15 that is 96 hours.

    How do you clean a spray gun after Raptor liner?

    Clean gun, equipment and overspray with a lacquer thinner or other acetone based solvent before RAPTOR™ is fully cured. RAPTOR™ Bed Liner and Protective Coating is a very durable coating. Although difficult to do, RAPTOR™ can be scratched or sustain damage which requires a repair.

    How many coats does a raptor have?

    The recommended RAPTOR application is 2-3 coats with a 60 minute flash time between coats. If further build is needed, it is recommended to carry this out in several applications. For instance, apply the first 2-3 coats, bake or allow 24-hours to dry and then apply another 2-3 coats, etc.

    What bed liner does Ford use? (video)

    https://www.youtube.com/watch?v=2gbIJWXN2C8

    Do you have to sand before bed liner?

    Sand the Surface

    If you simply apply the DIY spray on bed liner to the smooth surface of the truck, the application will not adhere properly. Instead, you should sand the surface to create a texture the liner can securely adhere to. For a new truck, this means removing the shine.

    What is the toughest spray on bedliner?

    Speedliner® is the world’s toughest spray-on bed liner. Independent laboratory tests show Speedliner® to be 80% stronger than competitors’ spray-in bedliners. Your truck bed can withstand nearly twice the abuse of other spray on bed liners.

    Can you remove Raptor liner?

    Using a heat gun and chisel, heat the pieces of liner and chisel them away. Most people use a hand tool, like a paint scraper, but some also choose to use more aggressive air chisels. Of all the methods available to truck owners, this is probably the best.

    Can you wax Raptor liner?

    What Do You Clean Up Raptor Liner With? The surface needs to be cleaned up with wax and grease degreasing equipment and a bright color is the ideal solution for polishing it. RAPTOR should be applied after the surface has been cleaned.

    Is Raptor paint easy to apply?

    Cured RAPTOR can easily be touched up. Just clean the surface, sand and featheredge a few inches into the surrounding area, re-clean, and mix and apply as usual. No need to prime again unless you sand down to bare metal.

    How do I apply for Raptor liner? (video)

    https://www.youtube.com/watch?v=MKzhSHpebos

    How many gallons of bed liner do I need to paint my truck?

    For example, if you have a 10-foot length and a 6-foot width, you would end up with a total of 60-square feet. So, as a general rule of thumb, one gallon should be sufficient for a 6-foot pickup bed. Purchase and additional 1-2 quarts for an 8-foot bed.

    What size air compressor do I need for raptor liner?

    but, IIRC, the raptor kit requires 6 cfm at 65 psi. so while that compressor may not be up to the task, you could probably still get it done, just have to take breaks and let the pressure build up, and hope that in the extra time, the liner does not harden up. clinging on to sanity, one motorcycle at a time.

    Can you spray Raptor liner over old liner? (video)

    https://www.youtube.com/watch?v=_sGtxtSfIYA

    How much hardener do I put in a Raptor liner?

    RAPTOR is easy to mix. Simply fill the RAPTOR coating bottle with hardener to the first ridge “A” (250ml/0.5 pints of hardener).

    What hardener can I use with Raptor liner?

    Restrictions. Add 1 part Hardener to 4 parts U-Pol® Urethane Primer or U-Pol® Raptor Bed Liner below. Temp Range 70°-85°F. Liter (33.8 oz).

    Can you Raptor coat over paint?

    If you want to coat your vehicle in RAPTOR but don’t have the patience for a bare-metal re-spray, fear not. RAPTOR can be applied directly over OEM paint with just a few simple steps. Begin by washing the surface with a quality car wash to remove organic contaminants including grease and dirt.

    Can Raptor liner be applied over primer?

    Can You Spray Raptor Liner Over Primer? Steel and alloy wheels can be RAPTOR-treated. Sand with 80-180 grit, RAPTOR Acid Etch Primer (UP5023) or epoxy primer over exposed bare metal, and application are the same as applying a truck bed primer.

    Where can you buy Raptor liner?

    U-POL Raptor Black Urethane Spray-On Truck Bed Liner & Texture Coating, 1 Liter – Walmart.com.

    Is Raptor liner flexible?

    Spray or roll RAPTOR on high traffic areas; it’s scratch and stain resistant and easy to clean, simply hose it off. Its flexible formulation can handle impacts without cracking, making it perfect for its most popular application as a truck bed liner. RAPTOR is unlike other bed liners or protective coatings.

    How do you clean a raptor liner?

  • Step 1 – Sweep Dirt off the Raptor Liner.
  • Step 2 – Water Spray the Bedliner.
  • Step 3 – Begin Washing the Raptor Liner.
  • Step 4 – Rinse and Dry.
  • Does Raptor liner stick to wood?

    Can Raptor Liner Be Used On Wood? Generally, RAPTOR can be applied directly to wood and plywood substrates when light sanding is “OK”.

    How much does it cost to Rhino line an entire truck?

    Overall, it will cost you about $4,000 to Rhino Line your entire truck. The typical range is between $3,000 to $5,000. These costs will differ depending on your mechanic’s location and the make/model of your car.

    How much does it cost to rhino line a truck bed?

    Wondering what a Rhino liner install costs? We conducted a national survey of Line-X and Rhino Liner installers and we learned that the national average install price is $470.41. That’s nearly $100 more than a DualLiner (which, for the record, does a better job of protecting your truck bed).

    How much does a rhino truck bed liner cost?

    Of the quotes we received, the minimum cost of a spray in bedliner is $425 and the maximum is $700. The average cost to have a spray in bedliner installed is $512.

    Line-X Cost… Rhino Linings Cost… How Much Do Spray in Bedliners Cost?

    Spray In Bed Liner Installer Minimum Cost of Spray In Bed Liner
    Rhino Linings $499

    Can you use Raptor liner as undercoating? (video)

    https://www.youtube.com/watch?v=Zsyct5KEGzo

    Will Rhino liner stop rust?

    Not only will our Rhino HardLine spray-on liner protect your truck bed from damage, it will prevent rust and corrosion as well.

    Does truck bed liner prevent rust?

    Spray-on liners effectively protect against rusting, corrosion, abrasion and other types of damage. Drop-in liners aren’t a tough concept to grasp either. Simply put, a drop-in liner is made from a form fitted plastic sheet that is placed (or dropped) into the bed. Then, it’s bolted into place.

    Can you spray bed liner with a regular paint gun?

    A standard paint gun that shoots thinned top coats will not be able to spray bedliner. If you want thicker primer, you have to change the nozzles and needles on your paint gun.


    Leave a Reply

    Your email address will not be published.